2,5l Dusk Grey Country Colour
Variety of colours and unsurpassed durability – for all weather conditions!
- Osmo Country Colour is best suited for all wood in outdoor areas where an especially durable coating is required: timber cladding, balconies, windows and window shutters, fences, pergolas, wooden shingles, garden furniture and garden sheds, carports etc.
- Ideal for renewing old microporous finishes and weathered wooden surfaces
Surface Preparation
- Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Country Colour is ready to use
- Do not thin
- Stir well before use, if possible, please apply the first coat to all sides before installation
- Clean old microporous stains thoroughly
- Old paints and lacquers must be completely removed
- As a general rule, wear a dust mask during sanding works
- The finished surface is influenced by several factors, including the condition of the wood
- Therefore, a trial application is always required, especially for unfamiliar surfaces
- If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat
Number of Coats
- Two coats on raw wood; for renovations, normally one coat on the clean surface is sufficient – without sanding!
Methods of Application
- With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly and evenly to the clean and dry wood along the wood grain and spread well
- Allow to dry for approx. 10-12 hours under good ventilation
- After drying, apply a second coat – also thinly
- For renovation works, one coat applied to the clean and dry surface is usually sufficient
Cleaning of Tools
- With Osmo Brush Cleaner (free of aromatic compounds)
Drying Time
- Approx. 10-12 hours (normal climatic conditions, 23 °C/ 50 % rel. humidity)
- Lower temperatures and/or higher air humidity can increase the drying time
- Ventilate well while drying
Coverage
- 1 litre covers approx. 26m² with one coat. Coverage depends significantly on the condition of the wood
- All information refers to smooth and planed/ sanded surfaces
- Other surfaces may lead to differences in coverage
Note
- If surfaces in outdoor areas (e.g. windows, cladding) should have additional protection, apply one top coat of Osmo UV-Protection-Oil Clear (410 without film protection or 420 with film protection) after thoroughly drying
- This protects against dirt contamination and extends the life of the finish
- For Country Colour White 2101, please use Natural Oil Woodstain White 900
Caution
- Keep out of reach of children
- Do not get in eyes, on skin, or on clothing
- If medical advice is needed, have product container or label at hand
- Use only outdoors or in a well-ventilated area
- Warning: Wash out any used cloth impregnated with this product immediately after use or store in an airtight container (danger of self-ignition)
- The dried finish is classified as B2 (normal flammability) according to DIN 4102 regulations
- Safety data sheet available on request
Disposal
- Dispose of leftover product and completely emptied packaging according to local official guidelines (waste code number 08 01 11)
- Only completely emptied cans can be recycled
- Country Colour, which has been trusted for over decades, is also available in the colour of your choice
- Starting from 2.5 litres per colour tone, available in 186 RAL Classic and 1950 NCS colour tones, as well as with biocidal film protection additives
- Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered
Colour Tones
- 2101 White
- 2203 Light Ochre
- 2204 Ivory
- 2205 Sunflower Yellow
- 2308 Nordic Red
- 2310 Cedar/Redwood
- 2311 Signal Red
- 2404 Fir Green
- 2501 Labrador Blue
- 2506 Royal Blue
- 2507 Dove Blue
- 2606 Medium Brown
- 2607 Dark Brown
- 2703 Charcoal
- 2704 Dusk Grey
- 2708 Pebble Grey
- 2716 Anthracite Grey
- 2735 Light Grey
- 2742 Traffic Grey
Can Sizes
_____________________________________________________________________________________________
Product Information
- Opaque, at first slightly satin-gloss then satin finish natural oil based for wood in outdoor areas
- Wood tone and grain is covered
- The wood structure remains noticeable
- Microporous surface allows the wood to breathe and reduces swelling and shrinkage
- Water-repellent, extremely weatherproof and UV stable surface does not crack, peel, flake or blister
- No sanding necessary, just simply recoat; no primer is needed
- Easy and seamless application
- Finish stays workable while coating
- The dry finish is safe for humans, animals and plants (resistant to saliva and perspiration acc. German DIN 53160, suitable for children‘s toys acc. EN 71.3)
Recommended Use
- Osmo Country Colour is best suited for all wood in outdoor areas where an especially durable coating is required: timber cladding, balconies, windows and window shutters, fences, pergolas, wooden shingles, garden furniture and summer houses, carports etc. Ideal for renewing old microporous finishes and weathered wooden surfaces
Ingredients
- Based on natural plant oils (sunflower oil, soya oil and thistle oil), iron oxide and organic pigments, titanium dioxide white pigment, siccatives (drying agents) and water-repellent additives
- Dearomatized white spirit (benzene-free)
- EU limit value for this product (cat. A/e): 400g/l VOC (2010)
- This product contains max. 400g/l VOC
- Detailed declaration of ingredients available upon request
Technical data
- Specific gravity: 1.0-1.35g/cm³
- Viscosity: 20-60s DIN EN ISO 2431/4mm, viscid
- Odour: faint/mild, after drying odourless
- Flash point: >60°C acc. DIN EN ISO 2719
Storage
- Up to 5 years and longer if can is kept dry and closed tightly
- If thickened by frost, store for 24-36 hours at room temperature before use
