OSMO | 2708 Country Colour Pebble Grey 2.5l

2,5l Pebble Grey Country Colour

Variety of colours and unsurpassed durability – for all weather conditions!

• Osmo Country Colour is best suited for all wood in outdoor areas where an especially durable coating is required: timber cladding, balconies, windows and window shutters, fences, pergolas, wooden shingles, garden furniture and garden sheds, carports etc.
• Ideal for renewing old microporous finishes and weathered wooden surfaces

Surface Preparation

• Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Country Colour is ready to use
• Do not thin
• Stir well before use. If possible, please apply the first coat to all sides before installation
• Clean old microporous stains thoroughly
• Old paints and lacquers must be completely removed
• As a general rule, wear a dust mask during sanding works
• The finished surface is influenced by several factors, including the condition of the wood
• Therefore, a trial application is always required, especially for unfamiliar surfaces
• If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat

Number of Coats

• Two coats on raw wood; for renovations, normally one coat on the clean surface is sufficient – without sanding!

Methods of Application

• With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly and evenly to the clean and dry wood along the wood grain and spread well
• Allow to dry for approx. 10-12 hours under good ventilation
• After drying, apply a second coat – also thinly
• For renovation works, one coat applied to the clean and dry surface is usually sufficient

Cleaning of Tools

• With Osmo Brush Cleaner (free of aromatic compounds)

Drying Time

• Approx. 10-12 hours (normal climatic conditions, 23 °C/ 50 % rel. humidity)
• Lower temperatures and/or higher air humidity can increase the drying time
• Ventilate well while drying

Coverage

• 1 litre covers approx. 26m² with one coat. Coverage depends significantly on the condition of the wood
• All information refers to smooth and planed/ sanded surfaces
• Other surfaces may lead to differences in coverage

Note

• If surfaces in outdoor areas (e.g. windows, cladding) should have additional protection, apply one top coat of Osmo UV-Protection-Oil Clear (410 without film protection or 420 with film protection) after thoroughly drying
• This protects against dirt contamination and extends the life of the finish
• For Country Colour White 2101, please use Natural Oil Woodstain White 900

Caution

• Keep out of reach of children
• Do not get in eyes, on skin, or on clothing
• If medical advice is needed, have product container or label at hand
• Use only outdoors or in a well-ventilated area
• Warning: Wash out any used cloth impregnated with this product immediately after use or store in an airtight container (danger of self-ignition)
• The dried finish is classified as B2 (normal flammability) according to DIN 4102 regulations
• Safety data sheet available on request

Disposal

• Dispose of leftover product and completely emptied packaging according to local official guidelines (waste code number 08 01 11)
• Only completely emptied cans can be recycled
• Country Colour, which has been trusted for over decades, is also available in the colour of your choice
• Starting from 2.5 litres per colour tone, available in 186 RAL Classic and 1950 NCS colour tones, as well as with biocidal film protection additives
• Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered

Colour Tones

• 2101 White
• 2203 Light Ochre
• 2204 Ivory
• 2205 Sunflower Yellow
• 2308 Nordic Red
• 2310 Cedar/Redwood
• 2311 Signal Red
• 2404 Fir Green
• 2501 Labrador Blue
• 2506 Royal Blue
• 2507 Dove Blue
• 2606 Medium Brown
• 2607 Dark Brown
• 2703 Charcoal
• 2704 Dusk Grey
• 2708 Pebble Grey
• 2716 Anthracite Grey
• 2735 Light Grey
• 2742 Traffic Grey

Can Sizes

• 0.75l; 2.50l & 25l

_____________________________________________________________________________________________

Product Information

• Opaque, at first slightly satin-gloss then satin finish natural oil based for wood in outdoor areas
• Wood tone and grain is covered
• The wood structure remains noticeable
• Microporous surface allows the wood to breathe and reduces swelling and shrinkage
• Water-repellent, extremely weatherproof and UV stable surface does not crack, peel, flake or blister
• No sanding necessary, just simply recoat; no primer is needed
• Easy and seamless application
• Finish stays workable while coating
• The dry finish is safe for humans, animals and plants (resistant to saliva and perspiration acc. German DIN 53160, suitable for children‘s toys acc. EN 71.3)

Recommended Use

• Osmo Country Colour is best suited for all wood in outdoor areas where an especially durable coating is required: timber cladding, balconies, windows and window shutters, fences, pergolas, wooden shingles, garden furniture and summer houses, carports etc. Ideal for renewing old microporous finishes and weathered wooden surfaces

Ingredients

• Based on natural plant oils (sunflower oil, soya oil and thistle oil), iron oxide and organic pigments, titanium dioxide white pigment, siccatives (drying agents) and water-repellent additives
• Dearomatized white spirit (benzene-free)
• EU limit value for this product (cat. A/e): 400g/l VOC (2010)
• This product contains max. 400g/l VOC
• Detailed declaration of ingredients available upon request

Technical data

• Specific gravity: 1.0-1.35g/cm³
• Viscosity: 20-60s DIN EN ISO 2431/4mm, viscid
• Odour: faint/mild, after drying odourless
• Flash point: >60°C acc. DIN EN ISO 2719

Storage

• Up to 5 years and longer if can is kept dry and closed tightly
• If thickened by frost, store for 24-36 hours at room temperature before use